3M A1B1E1K1P2 Half Face Reusable Respirator Kit 6000 Series for Multi Gas & Vapour

3M™ A1B1E1K1P2 HALF FACE REUSABLE RESPIRATOR KIT 6000 SERIES FOR MULTI GAS & VAPOUR 

The 3M™ Half Face Reusable Respirator 6000 Series is low-maintenance, simple to use and extremely lightweight. The exhalation port provides increased durability, easy cleaning and reduced breathing resistance which helps to increase your comfort. Available in three sizes, all respirators have the 3M bayonet connection system allowing connection to a broad range of twin lightweight filters to protect against gases, vapours and particulates depending on your individual needs.

The twin filter design has a low profile and is well balanced.

The 6000 Series Half Face Respirators can also be used with 3M™ Supplied-Air Systems.

Meets the performance requirements of AS/NZS 1716:2012.

The respirator kit provides respiratory protection in a convenient and easy way. The 3M Half Face Respirator 6000 Series is simple and lightweight.

Kit Contains:

 • 1 x 3M™ Half Face Respirator 6000 Series (select size required)

• 1 x pair of 3M™ Multigas Cartridge 6059 A1B1E1K1P2

• 1 x pair of 3M™ Particulate Filters 5925, P2

• 1 x pair of 3M™ Filter Retainers 501

• 2 x 3M™ Respirator Cleaning Wipes 504

• 1 x 3M™ Respiratory Protection Guide

• 1x Handy storage container

3M™ A1B1E1K1 MULTI GAS/VAPOUR CARTRIDGE 6059 Provides protection against Multi-Gas, Organic Vapours, Inorganic and Acid Gases, Ammonia and Methylamine.  To be used when working with a variety of chemicals such as solvents (boiling point > 65°C), chlorine, hydrogen chloride, sulfur dioxide, hydrogen fluoride, hydrogen sulfide and ammonia.

3M™ P2 PARTICULATES FILTER 5925  Particulate Mask Respirator Filter is lightweight and provides low breathing resistance. It is made from 3M high performance filter media for effective filtration efficiency. To be used when needing protection against dusts, mists (including oil based particles) and fumes when fitted to 6000 series cartridge with the 501 retainer.

Common Applications/Hazards:
Provides protection against Multi-Gas, Organic Vapours, Inorganic and Acid Gases, Ammonia and Methylamine.  To be used when working with a variety of chemicals such as solvents (boiling point > 65°C), chlorine, hydrogen chloride, sulfur dioxide, hydrogen fluoride, hydrogen sulfide and ammonia.

Protection Factors: Note that any filtering respirator should not be used for protection at airborne concentrations of contaminants above the relevant IDLH levels. This cartridge/filter, when used for protection against the contaminants as specified, is capable of providing the following protection levels: – With a 3M 6000 Series Half Face Respirator: for airborne concentrations up to 10 times the Workplace Exposure Standard (WES) or 1000 ppm, whichever is the lower

Small size is light grey

Medium size is grey

Large size is dark grey

Click here to view the 3M Reusable Respirator Catalogue

Click here to view the 3M Reusable Respirator Starter Kit Brochure

Click here to view the 3M Technical Data Sheet for the 6000 Series