Anti-Freeze

DESCRIPTION:

Maxtreat Standard Anti Freeze is a nitrite and amine free coolant and inhibitor formulated for use as a radiator coolant in modern automobile engines.The product is designed to ensure satisfactory performance when diluted with good quality water to give solutions in the range of 25 – 67% Anti Freeze in water and contains over 70%

Monoethylene Glycol.

SPECIFICATION:

Ethylene Glycol based engine coolant for automobiles.

Colour                                                                         Clear Dark Green

Boiling Point             undiluted, C                          182

Freezing Point          33% v/v, C:                            -18 max

pH                               50% v/v aqueous solution  7.5

Flash Point               open cup, C                          119

Density                      @ 20 C, g/ml                         1.121

Foam Break Time     seconds                                 5

APPLICATIONS:

Maxtreat is recommended as a coolant for use in both aluminium and cast iron petrol or diesel powered engines.

The inhibitor used in Maxtreat with the addition of Ethylene Glycol meets the Australian Engine Coolant Standard AS 2108.1 – Type A.

Maxtreat Standard meets the GMH Specification H N 2043. The minimum recommended concentration is 33% but for extended protection a 50% dosage is required.

Replace coolant every two years or 40,000 kilometres where practical.

The above specifications are also recognised by Toyota, Mazda and Ford.

Important: as we have no control over where this product is used, where it is applied or how it will react, no warranty is expressed or implied as to the results obtained.

The seller, distributor or manufacturer shall not be liable for any injury direct or consequential, arising out of how the product is used.

Anti Freeze Safety Data Sheet