3M P2/P3 Toxic Particulate Filter 2135

3M™ P2/P3* TOXIC PARTICULATE FILTER 2135   |  PAIR

When working with toxic particulates such as asbestos (refer to Government guidelines), mould remediation and beryllium.

P3 Filters used when a higher protection factor is required. P3 Protection achieved only when worn with a 3M Full Face Respirator* otherwise P2 achieved when worn with a 3M Half Face Respirator. 

• Made from 3M high performance filter media for effective filtration efficiency
• Lightweight and provides low breathing resistance
• Suitable for use with 3M 6000/7500 Series Half Face Respirators and 3M 6000/7000 Series Full Face Respirators
• Note that any filtering respirator should not be used for protection at airborne concentrations of contaminants above the relevant Immediately Dangerous to Life or Health (IDLH) levels “
• This cartridge/filter, when used for protection against the contaminants as specified, is capable of providing the following protection levels: – With a 3M 6000/7500 Series Half Face Respirator: for particles, for airborne concentrations up to 10 times the Workplace Exposure Standard (WES) – With a 3M 6000/7800 Series Full Face Respirator: for particles, for airborne concentrations up to 100 x WES.

Meets the performance requirements of AS/NZS 1716:2012.

What is a P2 Rating?

• P2 is a respiratory filter rating under the AS/NZS1716 standards for use in Australia and New Zealand. Protects against mechanically and thermally generated particles.
• Filtration rate: Filters at least 94% of airborne particles
• Suitable for: Relatively small particles generated by mechanical processes eg. grinding, cutting, sanding, drilling & sawing
  Sub-micron thermally generated particles e.g. metal & welding fumes, fertilizer and bushfire smoke, diesel exhaust & smoke and acid gases
  Biologically active airborne particles under specified infection control applications e.g. viruses, bacteria, COVID-19, SARS, bioaerosols & fungus
• Often distinguished with blue head straps

What is a P3 Rating?

• P3 is a respiratory filter rating under the AS/NZS1716 standards for use in Australia and New Zealand. Protects against highly toxic or highly irritant particles.
• A P3 classification can ONLY be achieved when worn with a full facepiece.

How long will cartridges and filters last on the shelf and in use?

Stored unopened in the original packaging, 3M cartridges and filters will last five years. Once removed from their packaging, replace them after six months. The service life of cartridges and filters depends on a number of factors including the type and number of contaminants in the air, the breathing rate of the wearer, ventilation, humidity and respirator storage. Gas and vapour cartridges must be changed when contamination can be detected coming through cartridge by smell or taste. Particulate filters must be changed when breathing resistance increases and becomes uncomfortable.

There are 50 pairs in a carton.

Click here to view the 3M Reusable Respirator Catalogue